Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser that works with CAN buses. It is discrete and does not have LED indicators or key fobs and is concealed in the vehicle's wiring.
The user may also turn off the system for a short period of time by using Transport Mode when renting out their vehicle. This guide will walk you through the steps of installing the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car from key hacking attacks, cloning and relay attacks. The system is directly connected to the ECU of your vehicle and secured by a PIN code that you choose. It is inaccessible to thieves using diagnostic scanners or other advanced methods. It cannot be disabled with circuit cuts.
The system is simple to use, but it is essential to have a professional installation to ensure a secure and secure connection to your vehicle's ECU. An approved installer from Thatcham can assist with the installation and programming of your Ghost system. They can also suggest a tracking system or alarm to complete your vehicle's protection package.
First, the installer needs to disconnect the battery to prevent accidental airbag deployment or short circuits. After the battery has been disconnected, the installer may be able to work safely. Basic hand tools can be used for precise connections. A multimeter is a great tool to test electrical values. Insulation tape and cable ties are also essential for protecting connections and keeping wiring neat. The user's manual offers specific instructions specific to your Ghost Immobiliser model.
During the installation, it is important to choose a grounding point that's free of debris and paint. Installers should also ensure that the immobiliser's wires, CAN H and the CAN L are connected to the correct ECU ports. Based on the model, these wires might need to be soldered or plugged into. To ensure a stable and long-lasting connection, it is recommended that you choose a top-quality plug.
Transport Mode can be activated by the customer once the installation is completed. This allows the vehicle to be used by valet parking attendants or mechanics without needing to know the pin code. To do this, the customer must hit the button for service on the dashboard five times in a matter of 2 seconds. Once this is done, the system will confirm by displaying 5 signals.
The Autowatch Ghost 2 immobiliser is TASSA certified and is an extremely efficient immobiliser. It's a great choice for those who rent their vehicles often through platforms like Turo. Immobilisers can also lower insurance costs since it greatly reduces the chance of theft.
Getting Started
If you are looking for a solution that will protect your vehicle from thieves it is best to go with an autowatch ghost immobiliser . It will stop your car from starting even if a criminal steals or copies the key. It is possible because of its advanced technology, which prevents the engine from starting until the correct PIN code has been entered.
The device works by connecting to the vehicle's CAN bus network, allowing it to communicate with the ECU directly. It uses existing buttons on the dashboard and steering wheel to create a unique sequence that only you can identify and makes it impossible for others to start your vehicle. This is the most secure security system that will safeguard your most precious possessions, keeping its value intact in the event that you decide to sell it in the future.
Installing a Ghost immobiliser is easy, but you must follow the directions to avoid electrical problems and malfunctions of the system. You'll need to locate a 12V power supply and a suitable grounding for the car's chassis. After that, you are able to begin connecting the wires that will be used to activate the immobiliser. Make sure to use high-quality connectors and soldering techniques to ensure a secure connection. Also, ensure that you insulate the connections with heat shrink tubing and insulation tape to protect them from electrical short circuits and other issues.
Once the wires are connected, you can connect the battery and then turn on the engine to test the immobiliser's function. When everything is functioning correctly you can place it in a secure place beneath the dash or anywhere else in the vehicle. Make sure you hide it well to prevent a thief from tampering with it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified, which means that it meets the highest standards of security and is a fantastic protection against car thieves. It provides superior protection against key cloning, hacking, and relay attacks, and isn't able to be disabled unless you know the code. The device is also simple to use and can be put into a service valet mode so that your vehicle isn't activated if you bring it in for maintenance or an MOT.
Wiring
The Ghost Immobiliser, a cutting modern security system, was designed to deter theft of vehicles. It communicates with your vehicle's ECU and connects directly to the CAN bus. Ghost Immobiliser doesn't interfere with your vehicle's factory settings unlike other aftermarket systems that require the removal of circuit elements.
The system is also undetectable by thieves using scanners for diagnostics. This is due to the fact that it does not transmit and receive radio frequency signals and it relies on the CAN data to communicate with your ECU. It doesn't require any modifications to your existing key fobs.
To utilize the Ghost Immobiliser, simply switch on the ignition in your car and enter your disarm sequence (either one or two buttons). The indicator will flash two times to verify that you have entered the correct code. You can now begin driving your car safely.
Once installed, the Ghost Immobiliser will safeguard your vehicle from key cloning and hacking and will also protect the value of your most prized possession. If you have to hand over your vehicle to valet parking or for service The Ghost Immobiliser will be temporarily disabled in Transport Mode.
You'll require a constant power source (12V) in addition to an earthing point to complete the installation of a Ghost immobiliser. Make sure that both are well-insulated and safe to touch. Cable ties are also suggested for bundling and securing the wires. This reduces the risk of theft by potential thieves. Make sure you double-check the locations of these points to avoid committing a mistake and mark them with the help of tape or a label. It's also a good idea to check all connections for signs wear and tear. Loose connections can lead to problems with the system, so be sure that they're firmly in place and properly insulated. Also, don't forget test the Ghost Immobiliser after the installation is completed. This will make sure that the unit functions properly and that all connections are safe and well-insulated. Make sure to address any problems immediately.
Testing
The Autowatch Ghost immobiliser is an innovative vehicle security system that integrates seamlessly with your car's ECU to prevent unauthorised motor starting. The innovative technology protects your vehicle from key cloning and hacking along with other common methods used by thieves to steal vehicles. The Ghost also works in conjunction with other alarm and tracking systems to provide the most complete protection for your vehicle. This system's unmatched features and subtle design make it a popular choice for car lovers and security-conscious drivers alike.
In order to ensure that the Ghost Immobiliser is properly integrated the Ghost Immobiliser, it's important to follow every step of the installation process. Consult the wiring diagram for the vehicle to assist you in locating and connecting the wires. The next step is to determine the power and grounding sources. Once you've found them, you'll need to mark the points so that they are easy to locate when installing. It's essential to use high-quality materials and tools. Basic hand tools can help you make precise connections. A multimeter will check electrical values and guarantee safety. Cable tie and insulation tape ensure that all connections are neat. Additionally, ghost 11 immobiliser will give specific guidelines tailored to your Ghost model.
Before you begin installing it is important to test the system by entering the PIN code, then starting the vehicle. This step will confirm the immobiliser functions as intended and prevent unauthorised vehicle starts. This step should be performed regularly as part of your routine inspections of the vehicle to ensure the system is always functioning properly.
After the installation is completed Once the installation is complete, you can drive your car with confidence. The Ghost will guard your car from would-be car thieves. It will ensure that no one is able to drive away with your vehicle without having the correct PIN code. The Ghost can be used in conjunction with an approved Thatcham tracker that detects any attempts at theft or tampering. This will allow you to track your vehicle if it is stolen.
The Ghost is compatible with a range of vehicles, including those from the majority of major manufacturers. If you're interested in protecting your car with this innovative device, call Monty's Locksmith today to learn more about our installation and maintenance options. We are a TASSA Registered installer, a certification that guarantees that we adhere to the strictest guidelines and procedures for installing our products. This ensures customers insurance companies, customers, and law enforcement agencies that installations are performed safely and correctly.