Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser that works with CAN buses. It is discreet, does not use LED indicators or key fobs, and is concealed in the wiring of the vehicle.
The user may also turn off the system for a short period of time by using Transport Mode when renting out their vehicle. This guide will walk you through the installation of a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car from key hacking attacks, cloning and relay attacks. The system connects directly to your car's ECU and is protected by a unique PIN code that you can choose. It is not detected by thieves using diagnostic scanners or other advanced methods. It cannot be disabled by cutting circuits.
The system is easy to use, however professional installation is recommended to ensure a clean connection with the ECU of your vehicle. Installers certified by Thatcham can assist with the installation and programming of your Ghost system. They can also recommend an alarm or tracking system to complete the security package for your vehicle.
To avoid the accidental deployment of short circuits or airbags To avoid an accidental deployment of airbags or short circuits, the installer must remove your battery. When the battery is disconnected, the installer can safely begin working. Hand tools are the most basic to be used to make precise connections. A multimeter is useful to verify electrical values. Cable ties and insulation tape are also necessary for securing connections and keeping wiring neat. The user's manual provides specific guidance specific to the Ghost Immobiliser model you have.
It is essential to choose a grounding location that is free of paint or debris during installation. The installer must also make sure the immobiliser's CAN H as well as CAN L wires are connected to the correct ports on your vehicle's ECU. The wires can be connected or soldered, depending on the model. To ensure a reliable and durable connection, it is recommended that you use a high-quality plug.
Transport Mode can be activated by the customer after the installation is complete. This allows the vehicle to be used by valet parking attendants or mechanics without having to know the pin code. To accomplish this, the customer must hit the button for service on the dashboard 5 times within 2 seconds. The system will confirm this by displaying 5 indicators.
The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA verified and Thatcham approved. It's an excellent choice for those who rent their vehicles regularly on platforms like Turo. Having an immobiliser can also lower insurance costs since it significantly decreases the risk of theft.
Getting Started
If you're looking for a solution to protect your vehicle from thieves, you can't go wrong with an autowatch ghost immobiliser. It will stop your car from being started even when a criminal steals or copies the key. This is due to its high-tech technology that is designed to prevent the car's engine from starting unless the correct PIN code is entered.
The device is connected to the vehicle's bus network, CAN which allows direct communication with the ECU. It uses existing buttons on the dashboard and steering wheel to create a unique sequence that only you can identify, making it impossible for someone else to start your car. This is the ultimate system to protect your pride and joy. It will not lose its value should you ever decide to sell it.
Installing a Ghost immobiliser is easy, but you must follow the directions to avoid electrical problems and malfunctions of the system. First, you must locate and identify a constant 12V power source as well as a good grounding point on the vehicle's chassis. After that, you can begin to connect the wires that will be used to activate the immobiliser. Make use of high-quality connectors and soldering techniques to ensure a solid connection. Also, ensure that you insulate the connections by using heat shrink tubing or insulation tape to protect them from short circuits in electrical power and other issues.
Once the wires are connected, you can connect the battery and then turn on the engine to test the immobiliser's function. Once everything is working properly, you can install it in a safe location beneath the dash or anywhere else in the vehicle. Be sure to conceal it well to ensure that thieves cannot get it into a compromising position.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) that means it's a top-quality deterrent for car thieves. It is resistant to key cloning and hacking and is not able to be disabled without the code. The device is also simple to use and can be put into a service valet mode so that your automobile will not be activated when you bring it in for maintenance or an MOT.
Wiring
The Ghost Immobiliser is a cutting-edge security system that is specifically designed to deter theft of vehicles. It communicates with your vehicle's ECU and directly connects to its CAN bus. Ghost Immobiliser doesn't interfere with the factory settings of your car unlike other aftermarket systems that require the removal of circuit elements.
It's also undetectable to thieves using diagnostic scanners. This is due to the fact that it does not transmit and receive radio frequency signals and it utilizes the CAN data format to communicate with your ECU. Furthermore, it doesn't require any modification to your car's existing key fobs.
Enter the sequence to disarm (either two or one buttons) and then turn on the ignition of your vehicle to activate the Ghost Immobiliser. The indicator will flash twice to verify that you've entered the correct code. You are now able to start your vehicle and drive safely.
Once installed, Ghost Immobiliser protects your car against hacking or key cloning, while also protecting its value. In Transport Mode, you can temporarily disable the Ghost Immobiliser if you need to give your vehicle to service or valet park.
To complete a Ghost Immobiliser installation, you'll have to identify a source of constant power (12V) and an earthing point. Be sure that they are well-insulated and safe to touch. It is also recommended to use cable tie to secure and bundle the wires, since this will decrease the chance of tampering by potential thieves. Be sure to double-check the locations of these points to avoid mistakes, and mark them with an adhesive or label. Examine all connections for signs that they are wearing out. Be sure to ensure that all connections are in place, and properly insulated. Make sure to test your Ghost Immobiliser after the installation is completed. This will make sure that the unit functions correctly and that all connections are secure and insulated. Be sure to correct any issues as soon as they arise.
Testing
The Autowatch Ghost Immobiliser is an innovative vehicle security system that seamlessly into your car's ECU to stop the engine from starting without authorization. Its innovative technology safeguards your vehicle against key cloning and hacking along with other common methods employed by thieves to steal cars. The Ghost also works in conjunction with existing alarm and tracking systems to provide the most complete protection for your vehicle. The Ghost's unparalleled features, coupled with its subtle design makes it a preferred choice for drivers who love cars and security-conscious drivers.
It is important to follow the steps of installation to ensure complete integration of the Ghost Immobiliser. Consult the wiring diagram for the vehicle as it will assist you in locating and connecting the wires. The next step is to identify the power source as well as grounding points. Once you've located them, you will be required to mark the points so that they are easy to identify when installing. It's essential to use high-quality materials and tools. Hand tools are a must with making precise connections, while a multimeter will confirm electrical values and guarantee security. Insulation tape and cable tie ensure that all connections are neat. A Ghost-specific user's manual is also available.
It is crucial to test the system prior installing it. Enter ghost 11 immobiliser into the system and start the vehicle. This will ensure that the immobiliser is working according to plan, and prevents unauthorised vehicle starts. It is recommended to complete this procedure regularly as part of your routine inspections of your vehicle to ensure that the system is working properly.
Once the installation has been completed, you can begin driving your vehicle with confidence. ghost 2 immobiliser cost will guard your pride and joy from thieves who might steal your car. It will ensure that no one is able to escape with your car without having the correct PIN code. The Ghost can be linked to an approved Thatcham tracker that identifies any attempts at theft or tampering. This will allow you to track your vehicle if it is stolen.
The Ghost is compatible with a variety of vehicles, including those from most major manufacturers. Monty's Locksmith can help you secure your vehicle with this innovative device. Contact us today to find out more about our services and installation options. We are a TASSA Installer who is registered This certification ensures that we adhere to strict standards and procedures for installing our products. This ensures customers insurance companies, customers, and law enforcement agencies that installations are carried out safely and in a safe manner.