The Ghost Immobiliser
Immobilisers are an effective tool in the fight against vehicle theft. They prevent the car from being started without a key fob and work well to stop hotwiring as well as traditional methods of vehicle theft. However, newer methods like key cloning and relay theft are becoming more common.
The Ghost Immobiliser is designed to combat these new trends and make your vehicle undetectable. It is silent and stealthy and does not use radio signals, key fobs or LED indicators.
Easy to install
The Ghost Immobiliser is a revolutionary device that connects to the CAN data network inside your vehicle to prevent key cloning and theft. It is a TASSA approved product and is approved by insurance companies. It operates silently and is almost undetectable to thieves. It uses buttons on your steering wheel and center console to generate a unique pin-code sequence that you must enter before you can begin the car. You can create up to 20 different sequences to increase security. The system is simple to install and doesn't require any additional hardware.
autowatch ghost immobiliser is recommended that you use an authorised CAN immobiliser installer that specialises in the specific type of vehicle you have to get the best results. Ideally, they will have a workshop close to you that you can visit to get your installation done. You will also find an array of tools and materials that can assist you in the installation. These include hand tools, a multimeter, and insulation tape and heat shrink tubing to protect connections. A user manual will give you the necessary instructions for your vehicle's wiring.
Before beginning the installation Before beginning the installation, disconnect the battery to prevent short circuits and airbag deployment. Double-checking the CAN L and H wires is vital, as incorrect identification can cause a misalignment of the system. It is also a good idea to label or mark the wires. Make use of a multimeter to ensure that the power source is supplying an uninterrupted 12V.
Advanced thieves can employ a variety of tactics to get around the Ghost Immobiliser. These include jamming and spoofing signals. These methods are based on amplifying the signal transmitted from your key fob to the electronic control unit of your vehicle. With the help of advanced anti-jamming technologies and a constant monitoring you can shield your vehicle from these sophisticated attacks.
Security Enhanced
A ghost immobiliser provides an extra layer to protect your vehicle from theft. It is an PIN security system that is entered by pressing buttons on your dashboard or steering wheel which makes it more difficult for thieves to steal your vehicle. The device is also designed to be hidden in your vehicle, without lights or other indicators that could signal a potential criminal to its presence. It is directly connected to the ECU of your car through the data bus. This means that it is not susceptible to relay attacks or hacking.
It's a fantastic investment for those who have expensive automobiles that are at a higher chance of being stolen due to their price and popularity. Its enhanced features protect your vehicle from key cloning and ECU swapping. Some ghost immobilisers are also paired with apps, so you can arm and dearm easily. They may also be equipped with a service/valet option that allows you to temporarily deactivate the immobiliser while your vehicle undergoes repairs or maintenance.
Ghost immobilisers also have a wonderful benefit that is that it doesn't need any wire cutting. This is an excellent option, particularly if your vehicle is more recent and does not include an immobiliser. Some systems may also be equipped to work with the GPS tracking device, thereby providing an additional layer of security to your vehicle. A GPS tracker could also lower your insurance rates. If you opt to buy ghost immobilisers ensure that it is TASSA verified and that a professional installer installs it for you.
Compatible with all major models and brands
The Ghost Immobiliser has been designed to be compatible with all major makes and models of vehicles protecting your vehicle from theft. It generates a unique pin number by pressing buttons on your steering wheel, console or door panels. You must enter the code before you can drive. The system is tamper-proof, undetectable and backed by a three-year warranty. It is also fully certified by insurance companies and insurance companies, which means it can help to lower your insurance premiums.
The Ghost system differs from the normal immobilisers, which use the key fob for ignition control. It is connected directly to the engine controller through the CAN bus. This means it's impervious to tampering, and is virtually impossible to remove or disable and cannot be stolen by organised car thief criminal gangs. In addition, the Ghost system can be linked with a secure iPhone app that allows for remote management and monitoring.
You can create a PIN that is simple to remember, yet mathematically impossible to guess for thieves. The PIN can be personalized and changed at any point and you can keep your car secure even if it's parked on the street or in a public parking lot. You can also choose the valet or service mode if someone else needs to drive your vehicle temporarily, such as when it is in the garage. This is an excellent way to protect your vehicle from being taken by an unscrupulous mechanic. To ensure your peace of mind you can choose a Ghost call alert which will notify you if your vehicle is moving or if it's moved.
Convenience
The ghost immobiliser shields your vehicle from common theft techniques like key relay or cloning. It works by connecting with the car's data network CAN and blocking communication with engine ECU. This makes it very difficult for thieves to hack or replicate your vehicle.
Installed, you'll need to enter a PIN of up to 20 digits long using the buttons on the dashboard as well as the steering wheel to begin the vehicle. The system is completely hidden and inaccessible to thieves because it does not emit any radio frequency signals. It can be set up with a PIN number that can be changed by the user, adding to its security. The system is designed to stop cutting of circuits, making it virtually impossible to alter.
If you do get lost in your PIN, there are some systems that allow you to communicate with the immobiliser via an app on your smartphone and instantly disarm it. Some even come with the option of a service/valet mode, which allows you to start your vehicle temporarily, such as when you have to drop it off to be serviced or valet parked.
The Ghost Immobiliser is also undetectable to thieves as it does not transmit radio signals, a major advantage over other aftermarket vehicle security systems. Additionally, it is easy to use and does not require any complex wiring. It can be used combination with dash cams to provide added safety. This dash cam is the Thinkware F70, which features clear & sharp 1080p HD dashcam footage, Format Free Technology and parking mode. The system can also be hardwired for optimal performance and longevity.
Installation
It's crucial to choose the most reliable immobiliser ghost in order to safeguard your vehicle from thieves. This device can stop car thefts by blocking the communication between key fobs and the engine controller unit. This stops thieves from stealing the signal and cloning the key fob to begin your car. It also detects any signs of manipulation and alert the vehicle owner.
The device is simple to install and works with the existing systems in your vehicle. It requires no modification to the wiring in your vehicle and can be concealed in a concealed location, such as under the dashboard. Follow the directions in the manual to ensure that the device is properly installed. After installation, it is essential to test the system. This will ensure that the ghost of the immobiliser functions as intended.
You can purchase an Autowatch Ghost 2 immobiliser and then have it installed by a reputable installer. The installer will connect Ghost to your vehicle's CAN Bus system, making it difficult for thieves to steal the system or bypass it. Installation typically takes between 2 and 3 hours.
During the process of installation it is recommended to consult the wiring diagram for the vehicle model you are using. This will allow you to locate the CAN High & Low wires. Low wires needed to connect your Ghost to the engine of your vehicle. Double-check all connections to ensure they're secure and insulated.
Once the installation is completed after which you can use the Ghost Immobiliser in normal operation. It will disable the ignition of your vehicle if it is not able to start it with the correct PIN, which is something you can enter yourself. The immobiliser ghost can be set to Service/Valet Mode in case you require your vehicle to be to be serviced or valet-parked.